A customer called me while configuring two new Dell PowerConnect 6224 switches in a stack. After stacking the switches no ports on unit 2 would link up. The web interface also looked wierd: As you can see above the switch looks like it has no ports at all. As we can read in the Dell […]
Dell Powerconnect 6224 switches not stacking
Last week I was on-site with a customer to install two Dell Powerconnect 6224 switches for use with an EqualLogic SAN. The stack was not configured automatically. I used command show stack-port For some reason the switch detected the stacking modules as 10 Gigabit modules. Fortunately the CLI reference guide has the commands to configure […]